ABB Talys FT-NIR
Single channel fibre-coupled process FT-NIR
Read More Below
The ABB TALYS FT-NIR features embedded software which executes real-time measurements and reporting operations without the use of an external PC. Pre-defined templates incorporate standard inputs and outputs for process control.
During operations, the process engineering values and alarms can be sent to the plant IT systems (DCS / PLC / controllers) via an ethernet port enabling Modbus TCP, OPC or CanBus communications. The analyzer also features a local simplified operator display that provides key information on process status.
Users can switch at any time between 3 different process monitoring configurations with up to 5 properties per configuration. When application modifications are required, the software configuration is updated remotely and simply uploaded to the analyzer using a USB key.
Conversely at the end of a batch, spectral data and electronic reports can easily be retrieved via the instrument USB port.
Dimensions: 37 cm (H) × 35 cm (W) × 26 cm (D)
Weight: 20 kg (primary analyser enclosure)
Mounting: wall or shelf mounting
Detectors available: − InGaAs 2.1: 4550 – 10500 cm-1 − InGaAs 2.1 TE-cooled: 4750-10500 cm-1 − InGaAs 2.6: 4000 – 10000 cm-1
Source: quartz halogen with electronic stabilization
Metrology: solid state laser
Resolution adjustable from 1 cm-1 to 64 cm-1
ModBus TCP (Ethernet, Serial RS232/RS485 via converter) − OPC DA (Ethernet) − CanOpen (Via USB to CAN converter)
Chemometrics models supported: Horizon MBTM Quantify, PLSPlus−IQ, Unscrambler, Pirouette
Fibre optics connectors: SMA 905
Electrical: <100 Watts consumption in routine operation
Environmental: − Operating temperature: 15°C to 35˚C − Operating relative humidity: <95% non-condensing
General purpose area classification, purgeable. Enclosure: IP54
Certifications: TÜVus, CE, CB Scheme (IEC), FCC, laser safety FDA/IEC/EN 60825-1, RoHS, WEEE
The TALYS ASP500 series feature an embedded processor, therefore no external computer needs to be supplied, approved or regularly upgraded by plant IT services. The instrument is intended to run real-time process applications. In addition, a special “sample grabbing” utility also allows triggered spectral acquisitions during the calibration model development phase
03 FT-NIR spectroscopy for biopharmaceutical applications Bio Pharma NIR
13 ABB Dryer Monitor Pharma Chemicals Food NIR
15 Caustic scrubbers Chemicals Pharma NIR
23 On-line conversion of styrene using NIR Polymers Chemicals NIR
24 Solvent Recovery Chemicals Pharma NIR
25 Real-Time Monitoring of Isocyanates During Polyurethane Synthesis Polymers Chemicals NIR
27 Monitoring of Hydroxyl & Acid Values in a Polyurethane Batch Reactor Polymers Chemicals NIR